DMM Phantom HMS Screwgate Orange

Minimal weight, maximum protection. An extremely compact, lightweight and yet strong, true HMS shape carabiner that is ideally suited to belaying and rigging. Use of an extra-short gate means it can take two clove hitches with ease. Round, durable and generous rope bearing surface. Rope friendly (larger bend radius) and smooth belaying. True HMS shape.  Allows the use of an Italian Hitch. Slim and tapering nose. Good for connecting to textiles Extra short gate. Allows more working space inside the carabiner. Screwgate opening. Manual locking gate requiring screwing/unscrewing of the barrel to lock/unlock. Tech Specs: Product Code: A572OR Dimensions: 71 x 96mm Weight: 56g MBS (Major Axis): 25kN MBS (Minor Axis): 9kN MBS (Gate Open): 7kN Gate Opening: 20mm Certification: EN362:2004 B, EN12275:2013 B/H

DMM Super Big Jim 10.5mm Orange 30m

The Super Big Jim has been developed and tested with climbing walls to cope with the demands that modern climbing centres place on equipment. It combines a durable braided core with a thick, robust sheath. The braided core does not untwist and flatten with use, and holds the sheath firmly in place. FEATURES: Braided core for extreme durability. Braided cores are more durable than the twisted cores of modern dynamic climbing ropes, making them suitable for environments where high levels of wear will be encountered. Perfect for use at climbing walls and outdoor centres. Single rope for simplicity and minimum weight. Single ropes are the most simple and lightweight rope systems for climbing. They can be used for any discipline, and are appropriate where protection follows a relatively straight line. If the route wanders, runners will need to be extended to prevent rope drag and prevent trad protection from lifting out. ThermoControl heat treatment for positive handling and suppleness. ThermoControl heat treatment alters the fibres within the rope, balancing the core and sheath to minimise slippage and prevent the rope shrinking or going stiff. This increases durability, and gives ropes supple handling. TECH SPECS: Product Code: RP192OR-30 Colour: Orange Diameter: 10.5mm Length: 30m Weight: 70 g/m No. of UIAA Falls: 9 Impact Force: 8.5kN % of Sheath: 40 Certification: EN892:2012 + A3:2023

DMM Shadow Locking Screwgate Orange

The Shadow strikes an ideal balance between low weight and useability. Weighing just 50 grams thanks to I-Beam construction, you can carry several Shadows before the weight starts to tell. Despite low weight, it is big enough to use in winter with gloves on. A locking carabiner for all situations. FEATURES; Personal Locking Carabiner for versatility and low weight. Personal lockers are used where weight and size are as important as strength, such as on sling runners and for most connection points on belay stances. In a standard 2 person climbing team, most of your locking carabiners will be personal lockers. Offset D carabiner for optimal loading and ergonomics. D-Shaped carabiners encourage loading in their strongest orientation by forcing loads toward the carabiner spine. An Offset D refines this basic design by extending the top bar, increasing internal volume. This improves handling and compatibility with thick ropes and slings. Keylock nose eliminates snagging. This carabiner's nose slots into a groove in the gate, allowing it to achieve full strength without a gate notch. This creates a clean internal profile that won't catch on gear, bolts or slings, giving easier clipping and removal from systems. I-Beam construction for optimum strength to weight ratio. I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality. Screwgate Locking. Manual locking gate requiring screwing/unscrewing of the barrel to lock/unlock. TECH SPECS; Product Code: A302OR Dimensions: 62 x 102mm Weight: 50g MBS (Major Axis): 24kN MBS (Minor Axis): 7kN MBS (Gate Open): 9kN Gate Opening: 18mm Certification: EN362:2004 B, EN12275:2013 B, UIAA121:2009

DMM Ceros Screwgate Orange

As an evolution of the Rhino, Ceros minimises the risk of cross-loading. Easy to operate with one hand, and able to locate on the belay loop in a single movement, the Ceros is intuitive to use and simple to rack. Correct orientation is achieved with an internal wiregate that keeps the Ceros captive on a belay loop, and a horn which prevents assisted braking devices moving onto the carabiner’s spine. Full section top bar gives smooth rope control and resists wear. FEATURES; Belay carabiner for consistent rope control and compatibility with rope control devices Downward opening internal wiregate enables secure attachment to belay loop and optimum orientation when belaying Keylock nose eliminates snagging I-Beam construction for optimum strength to weight ratio Full section top bar for consistent rope handling and increased longevity The ‘horn’ on top of the Ceros' spine helps prevent cross-loading the carabiner. Captive bar version allows installation in tamper proof systems Internal wire gate and/or captive bar aids in correct orientation on the end of lanyards or when installed on harness textile bridges. Captive bar version allows installation of an anchor ring in the basket TECH SPECS; Product Code: A562OR Dimensions: 74 x 121mm Weight: 86g MBS (Major Axis): 25kN MBS (Minor Axis): 7kN MBS (Gate Open): 7kN Gate Opening: 20mm Certification: EN362:2004 B/T, EN12275:2013 B/H/T

DMM Belay Master - Orange

Closing the clip on the Belay Master ensures the carabiner is safe for use. It can only be closed when the gate is screwed shut. When closed, the clip keeps the carabiner in its strongest orientation, prevents devices and knots from moving onto the spine, eliminates possible cross loading due to rotation. This feature makes the Belay Master the perfect belay carabiner for those new to belaying. Dimensions: 70 x 115mm Weight: 93g MBS (Major Axis): 25kN MBS (Minor Axis): 10kN MBS (Gate Open): 8kN Gate Opening (X): 20mm Certification: EN362:2004 B/T, EN12275:2013 B/H