DMM Protection Package NUTSET3 - Wallnut 1-11, Alloy Offset 7-11, Torque1-4

Nuts in all shapes and sizes. Sets of DMM passive protection that make the perfect starting point for building a comprehensive climbing rack. Weight: 998g Certification: EN12270:2013

DMM Micro Wallnut 00 Gold

Small but mighty. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock. FEATURES: Micro protection for small cracks: As climbs become harder, the need to make the most of all available protection increases. Micro protection lets you protect cracks which normal sized pieces would not fit. Having these wires on your rack gives you more options. Large surface area effectively dissipates force: These nuts have large surface areas that spread forces in a fall across a greater area, increasing placement security in fragile rock. They increase security on routes where fragile rock may be encountered. Colour coded for easy size identification: The DMM protection range is colour coded on the anodised nut and shrink wrap for quick and easy size selection. Passive protection works in wet and icy conditions: Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced. TECH SPECS: Product Name: Single / 00 Product Code: A1610AA Colour: Gold Strength: 2kN Weight: 5g Range: 4.0 - 9.7mm   Certification: EN12270:2013, UIAA 124

DMM Micro Wallnut 0 Blue

Small but mighty. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock. FEATURES: Micro protection for small cracks: As climbs become harder, the need to make the most of all available protection increases. Micro protection lets you protect cracks which normal sized pieces would not fit. Having these wires on your rack gives you more options. Large surface area effectively dissipates force: These nuts have large surface areas that spread forces in a fall across a greater area, increasing placement security in fragile rock. They increase security on routes where fragile rock may be encountered. Colour coded for easy size identification: The DMM protection range is colour coded on the anodised nut and shrink wrap for quick and easy size selection. Passive protection works in wet and icy conditions: Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced. TECH SPECS: Product Name: Single / 0 Product Code: A1610AA Colour: Blue Strength: 2kN Weight: 6g Range: 4.6 - 10.8mm Certification: EN12270:2013, UIAA 124

DMM Wallnut 9 Gold

Despite their simple appearance, Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. FEATURES; Curved taper gives stable placements and resists lifting out.  A Wallnut's curving taper fits a wide variety of cracks in different rock types. Their design creates three points of contact between the nut and rock in a placement, giving stable placements that resist lifting out. Allows placement in two orientations for increased versatility.  Passive protection can be placed either side or face on, doubling the number of cracks any single piece can protect. Grooved faces improve security in irregular rock.  Wallnuts and Offsets have a groove machined into their faces, allowing them to sit better in irregular placements and on highly featured rock. This makes them more versatile across different rock types. Colour coded for easy size identification.  The DMM protection range is colour coded on the anodised nut and shrink wrap for quick and easy size selection. TECH SPECS; Product Code: A169AA Colour: Gold Strength: 12kN Weight: 50g Certification: EN12270:2013, UIAA 124

DMM Torque Nut Set - Size 1-4

Torque Nuts can be used to protect parallel sided cracks. Their shape means they can be used in multiple orientations, giving you a wide range of placement options with every piece. Lightweight aluminium alloy construction means that despite their low weight, each Torque Nut has a 14kN strength rating. An extendable sling lets you reduce rope drag without extra quickdraws, and can be replaced with DMM's in-house re-slinging service. Torque Nuts work in all conditions. They are especially useful in winter, when icy cracks cannot be protected with cams. However, Wired Torque Nuts are more resistant to accidental axe strikes and easier to control placing above your head. Colour coded for easy size identification. The DMM protection range is colour coded for quick and easy size selection. Colours are co-ordinated across all active protection, for quick selection of alternatives if your first choice doesn't fit. Extendable sling reduces rope drag and rack weight.  Extendable slings allow speedy placement extension without additional quickdraws. Extending placements reduces rope drag when routes change direction, move round corners or over roofs. Simply rack each cam on its own carabiner for a self-contained system that is quick and easy to extend. Carrying less quickdraws minimises rack weight on your harness. Shape allows placements in multiple orientations.  Torque Nuts can be placed in multiple orientations, allowing each piece to fit several sizes and shapes of crack. Passive protection works in wet and icy conditions. Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced. Tech Specs; Set / 1-4 Product Code: A1741/44 Colour: Assorted Strength: 14kN Weight: 374g Certification: EN12270:2013

DMM Wallnut 6 - Red

Despite their simple appearance, Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Curved taper gives stable placements and resists lifting out Passive protection can be placed either side or face on, doubling the number of cracks any single piece can protect. Grooved faces improve security in irregular rock The DMM protection range is colour coded on the anodised nut and shrink wrap for quick and easy size selection. Product Code: A1616AA Colour: Red Strength: 12kN Weight: 39g Certification: EN12270:2013, UIAA 124

DMM Wallnut 4 - Gold

DMM Wallnuts are the backbone of a trad climbing rack. The tapered faces and sides provide secure placement options. Scooped faces aid stability and reduce weight. They are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Features: Dimensions: 11.0/ 17.6mm Weight: 30g Strength: 12kn Colour: Gold

DMM Wallnut 5 - Blue

DMM Wallnuts are the backbone of a trad climbing rack. The tapered faces and sides provide secure placement options. Scooped faces aid stability and reduce weight. They are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Features: Dimensions: 13.2 / 19.4mm Weight: 32g Strength: 12kn Colour: Blue

DMM Wallnut Set 7-11

Wallnut Set 7-11 Product code: A1617/21AA Colour: Assorted Strength: 12kN Weight: 259g Range: 18.9 - 37.4mm Certification: EN 12270:2013   Despite their simple appearance, Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness.

DMM Wallnut 1 - Purple

Wallnut No 1 Product Code; A1611AA Colour: Purple Strength: 7kN Weight: 15g Range: 6.7 / 14.3mm Certification: EN 12270:2013

DMM Wallnut 8 - Turquoise

Wallnut No 8 Product Code: A1618AA Colour: Turquoise Strength: 12kN Weight: 45g Range: 22.3 / 29.0mm Certification: EN 12270:2013

DMM Wallnut 10 - Silver

Wallnut No 10 Product Code: A1620AA Colour: Silver Strength: 12kN Weight: 56g Range: 28.8 / 32.6mm Certification: EN 12270:2013

DMM Wallnut 11 - Green

Wallnut No 11 Product Code: A1621AA Colour: Green Strength: 12kN Weight: 68g Range: 33.1 / 37.4mm Certification: EN 12270:2013

DMM Wallnut - Size 2 Green

Wallnut Size 2; Product Code: A1612AA Colour: Green Strength: 9kN Weight: 26g Range: 8.1 / 15.8mm Certification: EN 12270:2013 Wallnuts are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness.  Despite their simple appearance, Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight. Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them.  Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness.

DMM Wallnut - Size 3

Wallnut Size 3; Product Code: A1613AA Colour: Silver Strength: 11kN Weight: 28g Range: 9.4 / 16.5mm Certification: EN 12270:2013

DMM A1611/6AA Wallnut Set 1-6

DMM Wallnut Set 1-6 Product Code: A1611/16AA Colour:  Assorted Strength: 7 - 12kN Weight: 170g Range: 6.7 - 22.6mm Certification: EN 12270:2013