The ultra-light and durable touring pin binding for high alpine challenges with DIN settings from 4 to 10. Category: Touring Pin Din/ISO Range: 4.0 - 10.0 Boot type: Touring Boots Recom. Skier's Weight: max. 110 kg Stand height w/o ski: 18 mm Toe System: Carbon reinforced Pin Toe Step-in Heel: ALPINSIT heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight without brake: 245 g / 335 g (with optional brake) Colour: Black-Titanium
Alpinist 12 Pin Ski Touring Binding with 90mm Brake
Super-light, ascent-oriented touring pin binding with ISI toe piece and great step-in comfort. Built for high alpine challenges. Specifications Din/ISO Range: 6.0 - 12.0 Boot type: Touring Boots and Freetour boots with pin inserts Recommended Skier's Weight: Max. 110KG Stand height w/o ski: 13mm Toe System: ISI Toe Step-in with wide pad and rubber stop for secure entry Heel: Alpinist heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight without brake 270g Weight with brake: 360g
Alpinist 8 Ski Touring Binding - Black
The ultra-light and durable touring pin binding for high alpine challenges with DIN settings up to 8, specifically optimized for light weight touring enthusiasts. Category: Touring Pin Brake width: optional (90, 105 or 115 mm) Din/ISO Range: 3.0 - 8.0 Boot type: Touring Boots Recom. Skier's Weight: max. 110 kg Stand height w/o ski: 18 mm Toe System: Carbon reinforced Pin Toe Step-in Heel: ALPINSIT heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight without brake: 245 g, 335 g (with optional brake)
Ambition 10 Ski Bindings W/O Brake
The TYROLIA Ambition Alpine Touring binding features; AT (Alpine Touring) Toe AFS Telescopic tube AT (Alpine Touring) Heel Climbing Aid Stand height: 38 mm DIN: 3-10
125mm Brake for AAAmbition ski bindings with brake code [C].
CREST 10 establishes its reputation as the most versatile binding in ATK® Touring category: its lightweight allows long excursions and steep climbs, while the unique technical features of the heel part extend its use to the most extreme descents! Easy Entry System®: new geometry of the toe parts elements that makes the step-in easy and confident with any tech boot available on the market, even in case of worn out soles. Monolink® Technology 1.0: the left arm of the toe part is fix, provides a weight reduction of 2,5 grams per toe part and improves stiffness. Lower pressure on the locking system with higher performances. The Heel Flap with raiser provides 3 different walking modes. The built-in crampons slot assures the perfect insertion of any ATK® crampon size. A 20 mm ADJUSTMENT PLATE is integrated in the heel part to assure a fast adjustment in case of boot substitution (up to 2 full sizes). The release system provides a 5 to 10 adjustment range, both lateral (Mz) and vertical (My). CAM RELEASE SYSTEM®: exclusive system that provides the most stable downhill performance on the market, extremely precise release and the softest heel step-in of the industry. ELASTIC RESPONSE SYSTEM®: an elastic sliding system applied to the heel part to ensure the natural ski flex (also in case of big jumps/compressions), improves the binding release performance when the binding is stressed, reduces the pressure on the ski-boot-binding system. SKI-BRAKE: the binding offers different sizes (75, 86, 91, 97, 102, 108, 120 mm) to provide the perfect fit with any ski model. SKI-BRAKE ELASTIC SLIDE: integrated in the ski-brake pad to keep the lateral release value of the binding fixed. 280 Grams Materials: Alu 7075, Stainless Steel, POM Release 5-10 Adjustment 20 mm
Light and reliable for the long days in the backcountry, from the highest mountain tops to extreme downhill runs: simple yet complete, the heel piece features unique characteristics. Weight: 280g Easy Entry System®: new geometry of the toe parts elements that makes the step-in easy and confident with any tech boot available on the market, even in case of worn out soles. Monolink® Technology 1.0: the left arm of the toe part is fix, provides a weight reduction of 2,5 grams per toe part and improves stiffness. Lower pressure on the locking system with higher performances. The Heel Flap with raiser provides 3 different walking modes. The built-in crampons slot assures the perfect insertion of any ATK Bindings® crampon size. A 20 mm ADJUSTMENT PLATE is integrated in the heel part to assure a fast adjustment in case of boot substitution (up to 2 full sizes). The release system provides a 5 to 10 adjustment range, both lateral (Mz) and vertical (My). CAM RELEASE SYSTEM®: exclusive system that provides the most stable downhill performance on the market, extremely precise release and the softest heel step-in of the industry. ELASTIC RESPONSE SYSTEM®: an elastic sliding system applied to the heel part to ensure the natural ski flex (also in case of big jumps/compressions), improves the binding release performance when the binding is stressed, reduces the pressure on the ski-boot-binding system. SKI-BRAKE: 91mm - also comes in sizes 75, 86, 97, 102, 108 mm to provide the perfect fit with any ski model. SKI-BRAKE ELASTIC SLIDE: integrated in the ski-brake pad to keep the lateral release value of the binding fixed.
CREST 10 establishes its reputation as the most versatile binding in ATK® Touring category: its lightweight allows long excursions and steep climbs, while the unique technical features of the heel part extend its use to the most extreme descents! Materials: Alu 7075, Stainless Steel, POM Din: 5-10 Adjustment: 20mm Easy Entry System®: new geometry of the toe parts elements that makes the step-in easy and confident with any tech boot available on the market, even in case of worn out soles. Monolink® Technology 1.0: the left arm of the toe part is fix, provides a weight reduction of 2,5 grams per toe part and improves stiffness. Lower pressure on the locking system with higher performances. The Heel Flap with raiser provides 3 different walking modes The built-in crampons slot assures the perfect insertion of any ATK® crampon size A 20 mm ADJUSTMENT PLATE is integrated in the heel part to assure a fast adjustment in case of boot substitution (up to 2 full sizes) The release system provides a 5 to 10 adjustment range, both lateral (Mz) and vertical (My) CAM RELEASE SYSTEM®: exclusive system that provides the most stable downhill performance on the market, extremely precise release and the softest heel step-in of the industry ELASTIC RESPONSE SYSTEM®: an elastic sliding system applied to the heel part to ensure the natural ski flex (also in case of big jumps/compressions), improves the binding release performance when the binding is stressed, reduces the pressure on the ski-boot-binding system SKI-BRAKE: 97mm- also comes in sizes 75, 86, 91, 102, 108 mm to provide the perfect fit with any ski model. SKI-BRAKE ELASTIC SLIDE: integrated in the ski-brake pad to keep the lateral release value of the binding fixed Weight: 280 grams
ATK Crampons, the ultimate companion for conquering icy and challenging snow conditions. These crampons are meticulously designed with innovation and performance in mind, offering a lightweight solution without compromising on strength and durability. A must-have accessory for any backcountry skiing enthusiast. Key features: Lightweight design: From the special lightweight design for races (70mm; 49g) to the double shell version for extremely wide skis (135mm; 130g), ATK’s crampons are the lightest in the market. Thanks to an innovative heat treatment and a meticulous reduction in material thickness (down to 2mm), these crampons offer exceptional strength and flexibility without adding unnecessary weight to your setup. Premium materials and aggressive tip design: Crafted using the finest alloys, ATK's crampons strike the perfect balance between weight savings and durability. The combination of Titanal and Aluminum ensures long-lasting performance, allowing you to confidently navigate through all snow conditions. Our crampons also feature an aggressive tip shape that guarantees maximum grip on the hardest and iciest snow surfaces. With every step, you'll experience unparalleled traction and stability. Versatile sizing options: To cater to all ski widths, ATK offer these crampons in nine different sizes. Whether you need a narrower 70 mm or a wider 135 mm, you'll find the perfect fit for your skis. This comprehensive range ensures that every skier can benefit from the exceptional performance and grip provided by ATK's crampons. For sizes not shown in stock please get in touch. Emergency lanyard attachment: ATK's crampons are designed with safety in mind. Four small holes have been strategically placed, providing the option to secure the crampons to your boots using a lanyard in case of an emergency. This thoughtful feature adds an extra layer of security during challenging situations.
ATK Raider 13 Evo - Black 97mm
Elevate your backcountry experience with the ATK Raider 13 EVO bindings. Built upon the legacy of the acclaimed Raider series, these bindings introduce revolutionary innovations and refined user-friendliness, setting a new standard for advanced ski touring. Key Features: Lightweight Powerhouse: Weighing in at a mere 740g per pair, these bindings offer exceptional performance without compromising strength. Customizable Release: The adjustable release range of 5-13 and customizable toe piece tension (5-13 scale) provide unparalleled boot retention and safety. Length adjustment 25mm 2 climbing risers, Flat, +26mm & + 46.5mm Enhanced Durability: The new aluminum base plate on the heel piece ensures long-lasting performance, even in demanding conditions. Seamless Transitions: The automatic brake system and improved toe piece design facilitate effortless transitions between touring and skiing modes. Brake and crampon width: 97mm - also comes in 91mm, 102mm, 108mm, 120mm, (135mm not available with binding as standard) Versatility: Compatible with a wide range of boot toe profiles and available in various brake widths, these bindings cater to diverse skiing styles and conditions. Advanced Technology: Benefit from features like magnetic risers, rearward elasticity in the heel piece, and a superb CAM release heel for optimal performance and comfort. Recommendation: For optimal performance on skis over 90mm, we recommend pairing the Raider 13 EVO with the Freeride Spacer AL13, which enhances ski control and connectivity between boot and ski.
ATK Raider 13 Evo - Yellow 108mm
ATK RAIDER 13 EVO Yellow 2025 Bindings Elevate your backcountry experience with the ATK Raider 13 EVO Yellow 2025 bindings. Built upon the legacy of the acclaimed Raider series, these bindings introduce revolutionary innovations and refined user-friendliness, setting a new standard for advanced ski touring. Key Features: Lightweight Powerhouse: Weighing in at a mere 740g per pair, these bindings offer exceptional performance without compromising strength. Customizable Release: The adjustable release range of 5-13 and customizable toe piece tension (5-13 scale) provide unparalleled boot retention and safety. Length adjustment 25mm 2 climbing risers, Flat, +26mm & + 46.5mm Enhanced Durability: The new aluminum base plate on the heel piece ensures long-lasting performance, even in demanding conditions. Seamless Transitions: The automatic brake system and improved toe piece design facilitate effortless transitions between touring and skiing modes. Brake and crampon width: 108mm - also comes in 91mm, 97mm,102mm, 120mm, (135mm not available with binding as standard) Versatility: Compatible with a wide range of boot toe profiles and available in various brake widths, these bindings cater to diverse skiing styles and conditions. Advanced Technology: Benefit from features like magnetic risers, rearward elasticity in the heel piece, and a superb CAM release heel for optimal performance and comfort. Recommendation: For optimal performance on skis over 90mm, we recommend pairing the Raider 13 EVO with the Freeride Spacer AL13, which enhances ski control and connectivity between boot and ski.
Light and strong, the Atomic Backland Summit 12 BR is an all-round touring binding designed for committed skier tourers who crave adventure on every type of terrain. Unique to the binding is a Release Value Adjustment that offers release values up to 12 for trustworthy operation, superior safety, and performance. The AutoFlex System features a spring in the heel mechanism that automatically provides 5mm of travel between the toe and heel during the arc of a turn. The result is an easy-to-use binding that provides elasticity to support the natural ski flex while increasing absorption and improving safety. The Patented Step-in Aid guides the boot perfectly into position while a Climbing Aid easily adjusts to 0°, 7° or 13° with a simple flick of ski pole. Touring brakes feature a unique lock system that switches easily from hike to ski mode. The Alu/PA Pin Toe and Heel use a high-performance PA material that’s reinforced with fiberglass to keep the binding lightweight for climbing, yet strong and reliable for the down. Weight single piece (g) : 415
Offering Release Value Adjustment and flex absorption, the Atomic Backland Summit 9 BR is an all-round touring binding with maximum versatility and user-friendliness, making touring easy and accessible to all skiers. The Release Value Adjustment offers release values up to 9 for trustworthy operation, superior safety, and performance. The AutoFlex System features a spring in the heel mechanism that automatically provides 5mm of travel between the toe and heel during the arc of a turn. The result is an easy-to-use binding that provides elasticity to support the natural ski flex and further enhances safety, absorption, and performance. A Climbing Aid easily adjusts from 0° to 7° or 13° with a simple flick of ski pole and touring brakes feature a unique lock system that switches easily from hike to ski mode. The Patented Step-in Aid guides the boot perfectly into position. The Alu/PA Pin Toe and Heel uses high-performance PA material that’s reinforced with fiberglass to keep the binding lightweight for a next level connection between your feet and the snow. Weight single piece (g) : 415
Backland Tour 90mm Black/Gunmetal
The Atomic Backland Tour binding is a lightweight ski touring binding for the backcountry and comes with brakes – made to match Atomic Backland skis. The Atomic Backland Tour is a convenient and lightweight backcountry ski touring binding. Like all Backland gear it’s incredibly durable and easy to use: it comes with a patented step-in aid at the toe so your boot is automatically positioned to click in. Then two climbing aids work separately from the heel tower, so with one easy click you can choose between 0°, 7° and 13° positions. Backland Tour features a broad 40mm mounting for max power transmission on wide skis (this also cuts the risk of the screws pulling out). With brakes it weighs in at just 398g a piece, is compatible with standard ski crampons, and has a lengthy 50mm sole-length adjustment. Get ready to tour! Binding / Boot compatibility: Pin Boot-binding compatibility: Pin Brake Width: 90mm Release Values: W-M-EXP Gender: Unisex Season: 2026 Terrain: Touring Features: Touring Brakes: Featuring a unique lock system that switches easily from hike to ski mode. Patented Step-in Aid: Features an integrated toe bar that guides your boot into the perfect position. Climbing Aid (3 settings): Gain climbing efficiency by adjusting climbing aid to 0,7 or 13 degrees with a simple flick of a ski pole. Crampon Compatible Alu/Steel Pin Toe & Heel: strong and light for lightweight uphill and sturdy downhill performance. Tech Pins: Fits to the tech inserts of the touring or freeride boot. Locking Brakes: A smart click and lock brake system conveniently fastens skis together for easy shoulder carry.
Bindings N S/LAB Shift 10 MN Black SH100
Staying true to the revolutionary concept that made the original Shift stand out, Salomon’s new Shift2 bindings bring downhill skiability and uphill experience to new heights. Redesigned to enhance your skiing experience, these DIN 10 bindings elevate Shift’s cutting-edge technologies so you can conquer the mountain like never before. Weight per unit: 2 LB Compatibility Norm: MN Level of Practice: Intermediate Din Scale: 4-10 Skier Weight Min: 108 LBS Skier Weight Max: 220.5 LBS Binding Technologies: Low profile Chassis: Low stand height for increased terrain feedback and enhanced power transmission. Heel: Easy climbing aids manipulation: Ensures easy switch with the poles between climbing aid positions. Hybrid Heel: Aluminum lever for a rigid construction allowing enhanced power transmission. Made with Carbon-Infused PA for a light, yet strong construction. Main Material: Carbon-loaded PA: A very lightweight and resistant alloy of carbon and polyamid to fulfill the need for very light weight, extreme resistance and rigidity. Aluminium: A rigid and strong construction that allows enhanced power transmission. Pedal: Sliding Toe pedal: A specific pedal mounted on a spring that allows lateral movements and re-centering. It allows any normed boot to release out of the binding in case of a lateral fall. Power Block AFD: A new micrometric, height-adjustable AFD with a single-block aluminum insert that supports the boot and provides 30% more lateral stiffness compared to previous generations. Toe: Hybrid Toe: Ultimate elastic travel allowing for the boots to be held back when shocks get bigger. Compatible with all the normed boots with no compromise on safety or performance. Elastic travel: The ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release. Crampon system: Possibility to attach dedicated crampons to the binding. XL Wings: Long wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride bindings.
Advanced Performance Brake System, double magnetic heel flaps, release value adjustment all in less than 300 grams. Fewer concerns and more fun on every snowy ridge. Weight: 295 grams Materials: Alu 7075, POM, Stainless steel Release range: 5-10 Walking modes: Flat | +28mm | +45.5mm Boot size adjustment: 20mm Heel elastic travel: 12mm
CREST 10 establishes its reputation as the most versatile binding in ATK® Touring category: its lightweight allows long excursions and steep climbs, while the unique technical features of the heel part extend its use to the most extreme descents. Materials: Alu 7075, Stainless Steel, POM Din: 5-10 Adjustment: 20mm Easy Entry System®: new geometry of the toe parts elements that makes the step-in easy and confident with any tech boot available on the market, even in case of worn out soles. Monolink® Technology 1.0: the left arm of the toe part is fix, provides a weight reduction of 2,5 grams per toe part and improves stiffness. Lower pressure on the locking system with higher performances. The Heel Flap with raiser provides 3 different walking modes The built-in crampons slot assures the perfect insertion of any ATK® crampon size A 20 mm ADJUSTMENT PLATE is integrated in the heel part to assure a fast adjustment in case of boot substitution (up to 2 full sizes) The release system provides a 5 to 10 adjustment range, both lateral (Mz) and vertical (My) CAM RELEASE SYSTEM®: exclusive system that provides the most stable downhill performance on the market, extremely precise release and the softest heel step-in of the industry ELASTIC RESPONSE SYSTEM®: an elastic sliding system applied to the heel part to ensure the natural ski flex (also in case of big jumps/compressions), improves the binding release performance when the binding is stressed, reduces the pressure on the ski-boot-binding system SKI-BRAKE: 91mm- also comes in sizes 75, 86, 93, 102, 108 mm to provide the perfect fit with any ski model. SKI-BRAKE ELASTIC SLIDE: integrated in the ski-brake pad to keep the lateral release value of the binding fixed Weight: 280 grams
CREST 10 establishes its reputation as the most versatile binding in ATK® Touring category: its lightweight allows long excursions and steep climbs, while the unique technical features of the heel part extend its use to the most extreme descents! Materials: Alu 7075, Stainless Steel, POM Din: 5-10 Adjustment: 20mm Easy Entry System®: new geometry of the toe parts elements that makes the step-in easy and confident with any tech boot available on the market, even in case of worn out soles. Monolink® Technology 1.0: the left arm of the toe part is fix, provides a weight reduction of 2,5 grams per toe part and improves stiffness. Lower pressure on the locking system with higher performances. The Heel Flap with raiser provides 3 different walking modes The built-in crampons slot assures the perfect insertion of any ATK® crampon size A 20 mm ADJUSTMENT PLATE is integrated in the heel part to assure a fast adjustment in case of boot substitution (up to 2 full sizes) The release system provides a 5 to 10 adjustment range, both lateral (Mz) and vertical (My) CAM RELEASE SYSTEM®: exclusive system that provides the most stable downhill performance on the market, extremely precise release and the softest heel step-in of the industry ELASTIC RESPONSE SYSTEM®: an elastic sliding system applied to the heel part to ensure the natural ski flex (also in case of big jumps/compressions), improves the binding release performance when the binding is stressed, reduces the pressure on the ski-boot-binding system SKI-BRAKE: 97mm- also comes in sizes 75, 86, 91, 102, 108 mm to provide the perfect fit with any ski model. SKI-BRAKE ELASTIC SLIDE: integrated in the ski-brake pad to keep the lateral release value of the binding fixed Weight: 280 grams
F10 Tour Ski Bindings 90mm L 30.5 - 36.5
Marker´s F10 Tour is an ideal entry level touring binding that can offer years of great performance. Focusing on producing the right binding for the end user is Marker’s DNA. For the skier who wants a very light all-day touring setup with solid all-mountain performance, the Tour 10 features a DIN range of 3-10, making it a great choice for lighter weight skiers. Compatible to all kinds of alpine and touring boots, thanks to Sole.ID! The Climbing Aid works with 0°, 7° and 13° for relaxed uphill climbing in any angle. TÜV - All MARKER bindings are certified by the TÜV organization. Kingpin Heel - The revolutionary heel construction for the PinTech bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. The KingPin heel is also many times safer than traditional PinTech bindings.
F12 Tour EPF Ski Binding L - 30.5
The Tour F12 EPF adds even more muscle to Marker's touring range. The hollow axle heel focuses energy directly to the rear of the boot for optimum skiing performance; the wide EPF platform drives power to the edges. A height adjustable gliding AFD accommodates AT and alpine boots. Requires a ski at least 88mm wide. Weight 1117g (half pair) DIN 4-12 Brake 110mm Standard Multi Norm Sole length 305-365mm
F12 Tour EPF Ski Bindings Large/100mm
The F12 Tour EPF is the perfect on-piste/off-piste freeride binding for occasional touring adventures. MARKER's F12 Tour EPF is ideal for skiers who want to cross over from alpine touring to resort skiing on occasion. EPF (Extended Power Frame) features a super wide connection to the ski, increased power transmission and enhancing the downhill skiing ability of this exceptional uphill climbing product. The Extended Power Frame enables you for enjoy the widest touring skis also when the terrain gets rough and sloppy. On top it makes turn initiation easier in any snow conditions. Category: Touring Frame Size: Min - max boot sole length (mm) Size L: 305 - 365 Brake width: 100 mm Din/ISO Range: 4.0 - 12.0 Boot type: Adult, standard Alpine GripWalk Adult: Touring Boots Recom. Skier's Weight: <120kg Stand height w/o ski: 36 mm Toe System: Triple Pivot Light Step-in Heel: Hollow Linkage Heel adjustment range: 60 mm Walking modes: 0°, 7°, 13° Weight: 1096 g AFD Gliding Plate: Stainless steel
The Griffon 13 is a renowned binding from Marker, specially designed for experienced freeriders. It features a reinforced heel and toe cap, as well as a wider baseplate that guarantees excellent power transmission. Compatible with Alpine, GripWalk and touring boots, adjustment is easily performed with a flick of the screwdriver on the front of the binding, offering an adjustment range from 4 to 13 DIN. What's more, it offers the option of adjusting the height of the stop for optimum performance with your shoes, but it's not compatible with Head Cube3 and I-Type shoe models. Screwable Bindings: Yes Binding category: Performance Sole standard: Alpine / MN (Multi-Normes) Maximum value: 13 Minimum Value: 4 Level: Advanced - Expert Brakes width (mm): 110 Weight: 2.06 Sole norm: Alpine / Grip Walk (GW) / Touring
Griffon 13 ID Bindings - 100mm
The Completely Updated Pro Freeride Binding For Lighter Riders. Including New Heel And Toe For Improved Performance. Category: Freeride Freestyle Brake width: 100mm Din / ISO Range: 4.0 - 13.0 Boot type: Adult, standard Alpine GripWalk Adult Touring Boots Recom. Skier's Weight: <120kg Stand height w/o ski: 24mm Toe System: Triple Pivot Elite 3 Step-in Heel: Inter Pivot 3 Heel adjustment range: 20mm AFD Gliding Plate: Stainless steel Weight: 1030g
Griffon 13 ID Bindings - 110mm
The Completely Updated Pro Freeride Binding For Lighter Riders. Including New Heel And Toe For Improved Performance. Category: Freeride Freestyle Brake width: 110mm Din / ISO Range: 4.0 - 13.0 Boot type: Adult, standard Alpine GripWalk Adult Touring Boots Recom. Skier's Weight: <120kg Stand height w/o ski: 24mm Toe System: Triple Pivot Elite 3 Step-in Heel: Inter Pivot 3 Heel adjustment range: 20mm AFD Gliding Plate: Stainless steel Weight: 1030g
Griffon 13 ID Bindings - 120mm
Pro Freeride Binding For Lighter Riders. Category: Freeride Freestyle Brake width: 120mm Din / ISO Range: 4.0 - 13.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended Skier's Weight: <120kg Stand height w/o ski: 24mm Toe System: Triple Pivot Elite 3 Step-in Heel: Inter Pivot 3 Heel adjustment range: 20mm AFD Gliding Plate: Stainless steel Weight: 1030g The lighter version of the Jester, providing the same features for younger and lighter riders, is one of the most versatile freeride bindings on the market today, made for advanced to expert skiers. The new Griffon 13 ID is equipped with all new Triple Pivot Elite toe and Inter Pivot 3 freeride heel. Both are lighter and stiffer than previous parts and deliver improved edge grip and control. Anti Ice Rail to scrap off snow from the boot sole. Its Sole.ID technology allows to adjust the binding to accommodate either touring or alpine boot sole norms. On top the Griffon 13 ID features no-pull-out screws and a centralized swing weight, ideal for spins & twists.
Guardian MNC 13 Bindings Large
Adult norms MNC (Multi Norm Certified) Freeski brake XL Stomp pedal (60mm) Hike & Ride Switch Low profile Chassis Oversized platform Double Full Flex U Power Toe Automatic Wing adjustement High Lateral Transmission L35124300 (BC Brake) L37186500 (Binding - L)
Salomon's proven freeride performance, now combined with convenient Hike & Ride Technology. Hike & ride versatility: Simple ski / climb mechanism enables fast switching without removing skis. Multi norm certified: The toe-piece design eliminates friction, so it works with multiple boot sole norms. Unmatched freeskiing performance: Close to the ski platform improves snow feel and terrain feedback. AUTOMATIC WING ADJUSTMENT: No handling but automatic adjustment just by step-in. You can forget but nevertheless trust your binding !! ADULT NORMS HIGH LATERAL TRANSMISSION: More precision, more control to reach a new level of performance. HIKE & RIDE SWITCH: A quick, easy and convenient switch between skiing and hiking mode without having to remove the skis. LOW PROFILE CHASSIS: Low stand height for increased terrain feedback and enhanced power transmission. OVERSIZED PLATFORM: A super wide platform to ensure maximum lateral power transmission. DOUBLE FULL FLEX FREESKI BRAKE: Self retracting brakes: adapted to modern skis and practices, eliminates hang ups on switch landings. MANUAL TOE HEIGHT ADJUSTMENT SLIDING AFD U POWER TOE: Integrated Power Platform, wide for optimum power transmission. MNC (MULTI NORM CERTIFIED): Same performance and guaranteed safety level, whatever your boot norm.
Kids N C5 Bindings Black/White 75mm
Ideal for kids with growing feet, the C5 accommodates both junior and adult boot-sole norms, and provides great performance with convenience. Lightweight materials help reduce skier fatigue Junior/Senior Norm: Toe piece automatically adjusts to both junior and senior boot sole norms Convenient: Heel piece is designed to enable easy step-in while ensuring proper retention Stand Height 14 Recommended User Weight 22-100lbs Weight (pair) 1022g
Kingpin 10 Bindings - 75-100mm
The legendary Kingpin combines the lightweight ISI pin toe piece with an alpine heel piece including 0°/7°/13° climbing aid. This makes it very easy to walk on any terrain and ensures great descents with outstanding performance and top-level release functionality. The binding is therefore perfect for ambitious backcountry and freeride touring enthusiasts. A very stiff , carbon-reinforced front with an ISI toe piece makes the binding easier to step into, as a wide footprint with integrated stop automatically positions and aligns your boot. Utilizing optimally engineered pin levers, allows the pins to snap shut with just a gentle push. The wide hole pattern and XXL power transmitters deliver the ultimate in direct power transmission for the utmost control and fun on the descent. Category: Touring Best For: Touring, Freetour Boot Type: Touring Age: Adult Binding Weight: 695g Din/ISO Range: DIN 5.0 - 10.0 Stand height w/o ski: 21.5 Toe System: ISI Toe Boot Sole Range: 255mm - 390mm Walking modes: 0°;7°;13° Heel adjustment range: 25 Heel Technology: KINGPIN heel Recommended Skier's Weight: 30 - 105 kg Collection: Royal Family Brake width: 100 TECHNOLOGY; ANTI ICE PADS (CRUISE): Anti Ice Pads in the base of toe and heel (if no brake is installed) to prevent icing in critical areas POWER TRANSMITTER: Power transmitter in the heel with ball bearing for minimum friction and maximum centering for the lateral movement of the heel. KINGPIN HEEL: The revolutionary heel construction for the Pin Technology bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. The KingPin heel is also many times safer than traditional Pin Technology bindings. VERTICAL & LATERAL ADJUSTABLE RELEASE FUNCTION: Vertical and lateral individually adjustable release in the heel for improved release functionality. CLIMBING AIDS KINGPIN: The climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking. CRAMPON KingPin/Alpinist: Easy to install crampons for KINGPIN and Alpinist available in the sizes 80mm, 90mm, 105mm, 120mm ISI TOE: The ISI toe ensures that you'll be able to get in and out of the toe really quickly and easily.
MOUNT SCREW Pozi Flat Head M5 10mm
Binding Freedom have tooled up their own custom M5 screws which are specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a button head screw. The underside of the head has locking serrations to help ensure that the screw doesn’t back out over time. High quality stainless steel. For use with a Pozi #3 screwdriver. It is very important to maximise the number of threads engaged in an insert or a swap plate, so be sure to measure carefully. Inserts can accommodate from 3mm min to 6mm max of thread engagement. We like to target 4mm of thread engagement. Do not exceed the min/max numbers for any reason – you will not get a secure mount. These screws fit exactly like allen button heads in terms of length.
MOUNT SCREW Pozi Flat Head M5 12mm
Binding Freedom have tooled up their own custom M5 screws which are specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a button head screw. The underside of the head has locking serrations to help ensure that the screw doesn’t back out over time. High quality stainless steel. For use with a Pozi #3 screwdriver. It is very important to maximise the number of threads engaged in an insert or a swap plate, so be sure to measure carefully. Inserts can accommodate from 3mm min to 6mm max of thread engagement. We like to target 4mm of thread engagement. Do not exceed the min/max numbers for any reason – you will not get a secure mount. These screws fit exactly like allen button heads in terms of length.
MOUNT SCREW Pozi Low-Head 10MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
MOUNT SCREW Pozi Low-Head 16MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
MOUNT SCREW Pozi Low-Head 20MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
MOUNT SCREW Pozi Low-Head 22MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
MOUNT SCREW Pozi Low-Head 26MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
MOUNT SCREW Pozi Small-Head 10MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is tapered and fits like a flathead screw, but with a smaller diameter head so that they fit bindings which require a smaller diameter clearance. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
MOUNT SCREW Pozi Small-Head 12MM
Binding Freedom have tooled up their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is tapered and fits like a flathead screw, but with a smaller diameter head so that they fit bindings which require a smaller diameter clearance. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver. SOLD SEPARATELY For information on getting your screws and inserts mounted at Craigdon, please see our Binding Freedom page.
The ultimate freeride touring binding, the Atomic Shift 10 MN blends powerful downhill performance with a hybrid ski/walk function to access the best of both worlds: pin binding mobility on the way up and alpine stability for the down. The Micro AFD features a Power Block aluminium insert that integrally supports the AFD while allowing micrometric adjustment for an extremely precise fit with the boot interface. Tested extensively by the Atomic freeride team, the updated binding offers 30% more lateral stiffness for greater power transfer and better overall durability. Larger toe wings deliver improved shock resistance and a massive toe lever adds stability and durability. A sturdier brake lever improves the locking mechanism to avoid unintentional release, and a redesigned climbing aid is optimized to add 4mm of lift to each step. Multi Norm Certified, the Atomic Shift² 10 MN fits every normed boot on the market. Binding / Boot compatibility: [MNC (Multi-Norm Certified) + Pin] Boot-binding compatibility: Pin, MN DIN scale: 4-10 Gender: Unisex Season: 2025 Terrain: Powder, Touring
Protector PR 11 GW Alpine Bindings Black
The Protector PR 11 is the perfect binding if you are looking for maximum safety. Thanks to the innovative Full Heel Release (FHR) technology, it can significantly reduce the risk of knee injuries. The Protector PR 11 GW binding features innovative Full Heel Release (FHR) technology and promises outstanding safety by significantly reducing release forces in forward and especially backward twisting falls. Thanks to the intelligent 180° heel release, horizontal and vertical, the load on the knee is significantly reduced, ensuring safer skiing. This leads to a significant reduction and mitigation of knee injuries. As the binding is based on Tyrolia PowerRail technology, it works with all skis with a pre-mounted PR Base. In addition, the binding is GripWalk compatible and can be used with alpine and GripWalk ski boots. This binding innovation is for all piste skiers, whether young or old, beginner or advanced. In addition to the innovative Full Heel Release technology of the heel, the toe of the Protector binding offers all TYROLIA safety features, such as AFS, TRP toe system and Full Diagonal toe. Compared to the Protector PR 13 GW binding the Protector PR 11 GW binding covers a DIN range of 3-11 and has our TX toe instead of the RX toe. STAND HEIGHT: 33,5 mm DIN: 3 - 11 WEIGHT PER SINGLE BINDING: 1160g TX Toe Full Diagonal PowerRail HR Heel TECHNOLOGIES; FHR: The Full Heel Release Technology delivers intelligent 180° release both horizontally and vertically ensuring maximum safety in forward and backward twisting fall situations. GRIPWALK: Accommodates all Alpine ski boots (ISO 5355 TYPE A) plus all GripWalk ski boots (ISO 23223 TYPE A). TRP - TOE SYSTEM: The TYROLIA Roller Pincer Toe System (TRP System) with its four rollers allows a 180° release and exact centering of the ski boot. The TRP system reduces the load on knees and ligaments and improves performance considerably. AFS - ANTI FRICTION SLIDER: The TYROLIA Anti-Friction Slider (AFS) provides not only secure boot release but also rapid and exact boot re-centering. For better safety and reliability. FULL DIAGONAL TOE: The TYROLIA Full Diagonal Release function delivers intelligent 180° release both horizontally and vertically.
ATK Crampons, the ultimate companion for conquering icy and challenging snow conditions. These crampons are meticulously designed with innovation and performance in mind, offering a lightweight solution without compromising on strength and durability. A must-have accessory for any backcountry skiing enthusiast. Key features: Lightweight design: From the special lightweight design for races (70mm; 49g) to the double shell version for extremely wide skis (135mm; 130g), ATK’s crampons are the lightest in the market. Thanks to an innovative heat treatment and a meticulous reduction in material thickness (down to 2mm), these crampons offer exceptional strength and flexibility without adding unnecessary weight to your setup. Premium materials and aggressive tip design: Crafted using the finest alloys, ATK's crampons strike the perfect balance between weight savings and durability. The combination of Titanal and Aluminum ensures long-lasting performance, allowing you to confidently navigate through all snow conditions. Our crampons also feature an aggressive tip shape that guarantees maximum grip on the hardest and iciest snow surfaces. With every step, you'll experience unparalleled traction and stability. Size - 108mm. ATK offer these crampons in nine different sizes. Whether you need a narrower 70 mm or a wider 135 mm, you'll find the perfect fit for your skis. This comprehensive range ensures that every skier can benefit from the exceptional performance and grip provided by ATK's crampons. For sizes not shown in stock please get in touch. Emergency lanyard attachment: ATK's crampons are designed with safety in mind. Four small holes have been strategically placed, providing the option to secure the crampons to your boots using a lanyard in case of an emergency. This thoughtful feature adds an extra layer of security during challenging situations.
Raider 13 Evo Touring Bindings - Black 97mm
The Raider Evo range is completely redesigned and features a new series of bindings which apply the best of ATK Bindings’ technology to the Free Touring category. Raider 11 Evo, Raider 13 Evo and Freeraider 15 Evo are not just bindings, they are a work of art by ATK Bindings: a futuristic design for outstanding performance. The main innovation is a heel piece fitted with an automatic ski brake, replacing the manual push button mechanism, now activated by rotating the head of the heel piece. That is coupled with a revolutionary toe piece featuring adjustable release values perfectly adaptable to individual skiing styles. Weight: 370g Materials: Alu 7075, Stainless Steel, POM Release: 5-13 Adjustment: 25mm Easy Entry System®: new geometry of the toe parts make the step-in easy and compatible with any tech boot available on the market, even with worn out soles SNOW PACK PROOF SYSTEM®: even with several up-hill/downhill transitions, snow can't build up under the boot's toe, also avoiding snow loads on the toe piece ensuring weight is kept to a minimum U.H.V.® System (Up-hill Hardness Variator): compensates for wear and tear on the by allowing the locking hardness of the toe part to be changed reducing pressure on the locking mechanism CAM RELEASE SYSTEM®: exclusive system that provides the most stable downhill performance on the market, extremely precise release and the softest heel step-in of the industry ELASTIC RESPONSE SYSTEM®: an elastic sliding system applied to the heel part to ensure the natural ski flex (also in case of big jumps/compressions), improves the binding release performance when the binding is stressed, reduces the pressure on the ski-boot-binding system Magneto Heel Flaps® provide 3 different walking modes Built-in crampon slot allows the perfect insertion of any sized ATK size 25mm Adjustment Plate integrated into the heel part allows fast adjustment to different boot lengths Release system on the heel part provides a 5 to 13 adjustment range, both lateral (Mz) and vertical (My) RELEASE ADJUSTMENT TOE PIECE®: The heel release is now matched by the toe part; featuring adjustable release settings and delivering top class stability AUTOMATIC BRAKE SYSTEM®: An extraordinary innovation in which the ski brake is activated by simply switching from ascent to descent mode with no further action Colour: Black
S/LAB Shift MNC 13 Backcountry Ski Bindings
The S/Lab Shift 13 Multinorm binding ushers in the next generation of freeride capability, blending the touring efficiency of a pin (low-tech) binding, with the performance of an alpine freeride binding. For skiers who like to push the boundaries of the mountain and their skiing, Shift to the first ever truly comPromise-free binding. Weight per unit 885 G Compatibility Norm - MN Level of Practice - Advanced, Expert Din Scale 6-13 Skier Weight Min 67 KG Skier Weight Max 130 KG Binding Technologies: Low profile Chassis: Low stand height for increased terrain feedback and enhanced power transmission. Heel: Easy climbing aids manipulation: Ensures easy switch with the poles between climbing aid positions. Hybrid Heel: Aluminum lever for a rigid construction allowing enhanced power transmission. Made with Carbon-Infused PA for a light, yet strong construction. Main Material: Carbon Loaded™ PA: A very lightweight and resistant alloy of carbon and polyamid to fulfill the need for very light weight, extreme resistance and rigidity. Aluminium: A rigid and strong construction that allows enhanced power transmission. Toe: Hybrid Toe: Ultimate elastic travel allowing for the boots to be held back when shocks get bigger. Compatible with all the normed boots with no compromise on safety or performance. Elastic travel: The ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release. Crampon system: Possibility to attach dedicated crampons to the binding. XL Wings: Long wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride bindings.
S/LAB SHIFT² 10 MULTINORN BINDINGS Black/Silver 90
Staying true to the revolutionary concept that made the original Shift stand out, Salomon’s new Shift2 bindings bring downhill skiability and uphill experience to new heights. Redesigned to enhance your skiing experience, these DIN 10 bindings elevate Shift’s cutting-edge technologies so you can conquer the mountain like never before. Best for Alpine, Touring, Intermediate Weight: 915 g (The pair: 1830g) Din Scale: 4-10 Downhill skiability. The Power Block technology features a revolutionary Single Block aluminium insert that enhances your boots support, delivering an impressive 30% increase in lateral stiffness. Uphill and Downhill Performance. The robust pin toe design design ensures ease of use for touring, while the strong heel provides the confidence needed for aggressive downhill skiing. Lightweight. Made with carbon-infused, PA aluminium and steel, these bindings are stripped to the basics for less weight while keeping all the safety and support tech you need.
S/LAB Shift² 13 Multinorm Bindings Black SH100
Pushing the iconic Shift recipe to new heights, Salomon’s Shift2 bindings are trailblazing a new era of downhill skiability and uphill experience. Meticulously redesigned, these 13 DIN bindings elevate your skiing experience while remaining faithful to the revolutionary concept that made the original Shift bindings stand out. Weight per unit: 2 LB Compatibility Norm: MN Level of Practice: Advanced, Expert Din Scale: 6-13 Skier Weight Min: 147.7 LBS Skier Weight Max: 286.6 LBS Binding Technologies: Low profile Chassis: Low stand height for increased terrain feedback and enhanced power transmission. Heel: Easy climbing aids manipulation: Ensures easy switch with the poles between climbing aid positions. Hybrid Heel: Aluminum lever for a rigid construction allowing enhanced power transmission. Made with Carbon-Infused PA for a light, yet strong construction. Main Material: Carbon-loaded PA: A very lightweight and resistant alloy of carbon and polyamid to fulfill the need for very light weight, extreme resistance and rigidity. Aluminium: A rigid and strong construction that allows enhanced power transmission. Pedal: Sliding Toe pedal: A specific pedal mounted on a spring that allows lateral movements and re-centering. It allows any normed boot to release out of the binding in case of a lateral fall. Power Block AFD: A new micrometric, height-adjustable AFD with a single-block aluminum insert that supports the boot and provides 30% more lateral stiffness compared to previous generations. Toe: Hybrid Toe: Ultimate elastic travel allowing for the boots to be held back when shocks get bigger. Compatible with all the normed boots with no compromise on safety or performance. Elastic travel: The ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release. Crampon system: Possibility to attach dedicated crampons to the binding. XL Wings: Long wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride bindings.
Atomic Shift MNC 13 is a game-changer: the world’s first binding with full touring and freeride capability in one. It’s a genuine tech binding for hiking complete with pins. Then flick the Hike and Ride switch to ski mode and it turns into a genuine freeride binding for the way down, compatible with all normed boots on the market – alpine and touring. So for the first time you don’t have to compromise when you’re touring or skiing – either by hiking with a heavy solution like frames or skiing downhill with pins. You get the best for both. And even better, you can also use it for your alpine skiing days with your normal alpine boot. Finally, one binding for everything! Multi Norm Certified (MNC) Walk To Ride Compatible (WTR) Hike and Ride Switch Crampon Compatible Easy Step-in Low Profile Chassis Oversized Platform Freeski Brakes Toe Height Adjustment Black/Gold
The Marker Squire 11 is an all-mountain ski binding that offers reliability and strength for skiers looking to ski hard. The Squire 11 is a best-selling binding from Marker whose reliability, sturdiness and good value for money have made it internationally renowned. Ideal for an all-mountain skiing, it is perfect for a versatile skier looking to go faster and ski a little harder. It is equipped with a 100 mm wide ski stop to fit on your wide skis. The minimum and maximum release values are 3 and 11 DIN. The weight of the Squire 11 is approximately 1640 grams. Screwable Bindings: Yes Binding category: Freeski Year: Winter 2021/22 Sole standard: Alpine / Grip Walk (GW) Maximum value: 11 Minimum Value: 3 Level: Intermediate - Advanced Brakes width (mm): 100 Sole norm: Alpine
The Marker Squire 11 100Mm Black Yellow ski binding is ideal for skiers looking for performance. Compatible with Alpine and Grip Walk boots, it features DIN adjustment from 3.0 to 11.0 to suit lightweight, beginner to intermediate builds. Its ski stop prevents the ski from rolling down the slope and protects others in the event of a fall, while remaining lightweight, reliable and safe. Screwable Bindings: Yes Binding category: Performance Sole standard: Alpine / Grip Walk (GW) Maximum value: 11 Minimum Value: 3 Level: Intermediate - Advanced Brakes width (mm): 100 Weight: 1.64
Discover the Squire 11 90mm Black Teal from Marker, one of the world's best-selling binding models, developed to optimise your experience on the slopes and recommended for lightweight skiers. Compatible with Grip Walk (GW) and Alpine boot standards, it adapts perfectly to a variety of ski boot models. With a DIN adjustment range from 3.0 to 11.0, the Squire 11 offers a precise fit to meet the demands of skiers looking to push their limits. Its 90 mm ski stop guarantees compatibility with skis with up to 90 mm at the runner, enabling versatile use on different terrains. Lightweight at 1640 grams per pair, they remain a preferred choice for those seeking to combine performance and comfort. Screwable Bindings: Yes Binding category: Performance Sole standard: Alpine / Grip Walk (GW) Maximum value: 11 Minimum Value: 3 Level: Intermediate - Advanced Brakes width (mm): 90 Weight: 1.64
The Squire 11 is quite simply one of the bestselling ski bindings in the world. It is reliable, durable and offers a decent price/performance ratio. It's a great binding for a skier looking to go a little harder on any terrain. It offers a range of adjustment from 3 to 11 DIN, weighs 1640 grams per pair and offers a 90 mm ski stop. Screwable Bindings: Yes Binding category: Performance Sole standard: Alpine / Grip Walk (GW) Maximum value: 11 Minimum Value: 3 Level: Intermediate - Advanced Brakes width (mm): 90 Sole norm: Alpine, Grip Walk (GW)
The Squire 11 has progressive looks and is specially designed for lighter weight but fully motivated freeride and freestyle rookies. An lightweight Triple Pivot Light toe piece features a distinctive Ice Off Rail to keep the sole free of snow and ice. A state-of-the-art Hollow Linkage heel with its wider boot holder reduces the step-in force by approximately 35%, even with GripWalk soles. All in all, the Squire 11 is very compact and, despite its GripWalk compatibility, only 24 mm high, which allows a very direct feel and ski control. Highlights: Royal Family Boot Type: Alpine, GripWalk Age: Adult Binding Weight: 820g Din/ISO Range: DIN 3.0 - 11.0 Stand height w/o ski: 24 AFD Gliding Plate: Stainless steel Toe System: Triple Pivot Light 2 Boot Sole Range: 240mm - 370mm Heel adjustment range: 20 Heel Technology: Hollow Linkage 2 Recommended Skier's Weight: 30 - 110 kg TÜV Approved: Yes Category: Freeride Collection: Royal Family Brake width: 110mm TECHNOLOGY; HOLLOW LINKAGE 2 HEEL: Latest generation of the Hollow Linkage Heel. Improved step-in performance: 30 % less step-in force and easier entry. Also compatible with GripWalk boots ANTI ICE RAIL: Use the metal rail to scratch off ice and snow below your boot sole. GLIDING AFD: All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours. TRIPLE PIVOT LIGHT 2 TOE: The newest generation of the Triple Pivot Light 2 Toe features the Anti Ice Rail to scratch off snow and ice below your boot soles. GripWalk-ready to fit alpine and GripWalk soles! GRIPWALK: The sole-binding system for better walking comfort and top skiing performance. GripWalk contains of a new co-polymer sole with rocker profile. The convex shape and ribbed tread of the rubber add a lot of walking comfort and provide a much better grip. Still, integrated pads made of stiff and rigid materials, enable great power transmission and more precise release function of the binding. GripWalk soles are the perfect tuning parts designed for selected premium ski boots and bindings. Multinorme (Sole.ID): Height-adjustable gliding plate to be compatible with all boot soles on the market. Compatible with: Alpine (ISO 5355 A), Touring (ISO 9523) and GripWalk (ISO 23223 A) soles. Easy to adjust: Pozi screw at the front to adjust height of gliding plate.
STRIVE 14 Multinorm Sachet Pin D115
The Strive 14 features an ultra low-profile toe piece which creates a low centre of gravity. Combined with the lightweight three-piece heel, this binding enhances a skier’s power, control, and responsiveness due to more direct ski contact. This binding removes as much interference between you and the ski as possible to connect you to the terrain. Weight per unit: 2 LB3 OZ Compatibility Norm: MN Level of Practice: Advanced Din Scale: 5-14 Skier Weight Min: 127.9 LBS Skier Weight Max: 308.6 LBS Binding Technologies: Low profile Chassis: Low stand height for increased terrain feedback and enhanced power transmission. Heel: Arch Heel: Heel arch technology for lateral reinforcement. 3 Parts Heel: Extra-wide BC 3-parts heel, providing extreme resistance, strongest hold and increased stability. Main Material: Glass-Fiber PA: A dedicated polyamide reinforced with fibre-glass which makes bindings lighter, durable, and with more tolerance on skis. Pedal: Extra-wide Toe pedal (>60mm): A super-wide pedal that ensures the best lateral power transmission from skier to ski. Designed for intense freeskiing, perfect stability and enhanced confidence. Sliding Toe pedal: A specific pedal mounted on a spring that allows lateral movements and re-centering. It allows any normed boot to release out of the binding in case of a lateral fall. Toe: LDN Toe: This revolutionary toe piece boasts an ultra-low centre of gravity highlighted by an extra-wide pedal and neutral stance, so skiers can feel the pure sensations of all terrain. Elastic travel: The ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release. XL Wings: Long wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride bindings.
Vipec Colour Clip Toe and Heel Inserts
Personalise your Fritschi Diamir Vipec pin bindings with a coloured toe and heel insert. Available in five colours, Red, Green, Blue, Lime and Pink. One kit contains 4 x toe clips ( 2 x medium standard and 2 x high option), plus 2 x heel clips Please not these clips fit the Vipec 12 BLACK binding only
The Atomic Warden 11 MN is a solid option to go with any all-mountain ski Multi Norm certified, this binding works with all ISO norm ski boot soles – DIN, Touring and Walk To Ride (WTR). It has an Oversized Platform and U-Power Toe – a super-wide platform that provides extra lateral power transmission, steering, flex and dampening. This platform is also 30% wider than comparable bindings so works particularly well with progressive wider skis. It has a DIN range of 3.5 to 11. It also features a Low Profile Chassis, Progressive Transfer Pads and a special lightweight heel that keeps your ski nice and agile. Weight single piece (g) : 960